SparkFun Breadboard Power Supply Stick - 3.3V/1.8V

Sparkfun


$ 14.95



This is a very simple board that takes a 4-9V input voltage and outputs a selectable 1.8V or 3.3V regulated voltage. All headers are 0.1" pitch for simple insertion into a breadboard.

Input power can be supplied to either the DC barrel jack or the two pin header labeled + and -. Output power is supplied to the pins labeled GND and VCC. Board has both an On/Off switch and a voltage select switch (3.3V/1.8V).

The two sets of four GND and VCC pins are spaced such that when connected to our Basic Breadboard both power busses will be powered.

Note: Headers are not supplied. You will need to supply your own headers to connect this board to a breadboard. Check below for some breakaway header strips.

Dimensions: 2.15x0.65"

Features:

  • 4-9V input voltage via barrel jack or 2-pin header
  • 3.3V or 1.8V regulated output voltage
  • 800mA Operating Current
  • ON/OFF switch
  • Output voltage select switch
  • Power status LED
  • PTC fuse protected power
  • 5.5x2.1mm center positive barrel jack

Documents:

Brand: Sparkfun
Brand Part Number: PRT-13157
Our Part Number: b5965

Accessories

Breadboard - Self-Adhesive (White)
AC Power Adapter - 9VDC 650mA
Wall Adapter Power Supply - 5V DC 2A (Barrel Jack)
SparkFun Breadboard Power Supply Stick - 5V/3.3V
AC Power Adapter - 5VDC 2000mA (2A)
Wall Charger - 5V USB (1A)
SparkFun Breadboard Power Supply 5V/3.3V
SparkFun Breadboard Power Supply USB - 5V/3.3V
SparkFun Breadboard Power Supply Stick 5V/3.3V

Share this Product